MORPH 3 & MORPH 3 PRO Trial/Update Download

To download the latest installer for MORPH 3 or MORPH 3 PRO, please fill in the form below. Download URLs will be emailed to you shortly. The installer can be used to install from scratch, or to update to the latest version. The plug-in will run as a fully functional, 30-day free trial if you have no license and select "TRY". 

Please note that an account - but no hardware iLok! - is required to use this software, including the free trial.

Check this option to subscribe to our newsletter, and receive update information, occasional news messages, product announcements or other special offers. Your email address will not be transmitted to third parties or used for any other purpose other than sending you our newsletter. You may unsubscribe at any time without incurring any expenses other than internet connectivity fees charged by your ISP. You can review our privacy policy here.
Also, if you subscribe, you will receive our free reverb SUBSPACE, which you may optionally install and activate.

Version 3 Change Log

Version 3.2.0, May 29th, 2024: 

  • New MODELER slice size setting 16th (note). When slice size is set to 16th, the loaded file is segmented into 16th notes slices which are then played back in BPM/Tempo sync, with their ordering defined by the current style transfer analysis. File BPM is taken from the file meta data. If no tempo meta data exists, the algorithm assumes a perfectly trimmed loop of 1, 2, 4 or 8 bars duration and segments equidistantly. A control panel Set BPM is provided which allows entering a BPM value manually.
  • New SPC RANGE mode FULL ranging from 0 to 20,000 Hz fro increaed mapping felxibility.
  • 30 new factory MODELER models and settings, including drones, synthesizer loops, SFX and a wah-guitar.-
  • Accessibility improvements:
    - Various file/preset load commands can now be triggered using MIDI controllers. The trigger is generated when the controller value goes above 64.
    - The MODELER's Load File dialog can now be triggered by MIDI CC message #119.
    - The Previous/Next Preset commands can now be triggered by MIDI CC message #115 and #116.
    - The Previous/Next MODELER Setting commands can now be triggered by MIDI CC messages#117 and #118.
    - These MIDI message triggers can be disabled in the plug-in PREFERENCES popup.
  • Added new ALIGN modes TIMELINE and BOTH. TIMELINE delays only the bpm brid, delays the grid as well as the audio to match up with a side-chain input that is not latency compensated.
  • Increased the width of the Preset name display to facilitate displaying longer names.
  • Increased the width of the MODELER Setting name display in the MODELER Settings panel.
  • The MODELER Settings menu now shows a tooltip with the current MODELER Setting name.
  • The Waveform view and MODELER File Name displays now show a tooltip with the currently loaded MODELER file name.
  • The mouse cursor now changes appearance when hovering over interactive widgets.
  • Updated the Quick Start Guide to include MODELER 16th slice size.


Version 3.1.0, April 25th, 2024: 

  • Official Release for MORPH 3 and MORPH 3 PRO 
  • Significantly improved Formant Shift performance while improving sound slightly.
  • Reduced plug-in file size.
  • Improved overal plug-in performance.


Version 3.0.5 (PRO Only), April 18th, 2024:

  • Fixed an issue that caused the UI to not render correctly in some cases on macOS Sonoma
  • Significantly improved overall plug-in performance on Windows.


Version 3.0.4 (PRO Only), April 17th, 2024: 

  • Fixed a Crash in Ableton Live that could occur when freezing audio and a bypassed instance of MORPH 3 PRO was in the session. 
  • Significantly improved overall CPU performance by improving the performance of the vector UI
  • The Mixer Filters no longer use CPU if in neutral (off) setting. 
  • The filter cutoff is now displayed on hover. 
  • Fixed the reset modifier key for some controls. 
  • Fixed an issue where the click zones of the Mapping Editor Zone on/off buttons were misaligned with the graphics. 
  • Fixed an issue that caused the Reset History function to not trigger if the button was clicked too fast. 
  • Fixed an issue that caused the waveform vie and Mapping Editor to not scale correctly with the UI zoom function. 
  • Fixed an issue where changing the Modeler Mode or Morph Algorithm parameters did not mark the current preset as modified. 
  • Fixed an issue where an empty .zmodel file was created if the original .zmodel was missing. 
  • You can now move the waveform view selection range by holding Option/Alt while dragging. 
  • Factory Modeler presets now live in a "Factory Presets" subfolder. 
  • The Modeler Sub-Presets menu now has options to reveal the loaded file in the Finder/Explorer, to unload the loaded file, and to launch the Preset Manager app
  • Removed the VST2 MonoIn variant. 
  • Various fixes and improvements for the Preset Manager app. 


Version 3.0.3 (PRO Only), April 9th, 2024:

  • Significantly improved performance when MODELER SETTINGS panel is open. 
  • Fixed an issue that caused MODELER SETTINGS panel controls to "lag". 
  • Improved mapping editor click and snap zone behavior. 
  • Various improvements and new features for the MORPH 3 Preset Manager app.


Version 3.0.1 (PRO Only), March 30th, 2024:

  • Improved handling of MIN SLICE and MAX SLICE handles in Waveform Views. The click zones of the MIN/MAX SLICE handles in the waveform views have been made smarter, and will highlight the handle that will respiond when you click in most cases now. You can now click anywhere outside the range defined by the sliders to set the closer handle there directly. When clicking within the range, the closer handle is selected.
  • Improved Cross-Platform compatibility of user presets, MODELER sub-presets and zModels.
  • The waveform view and loaded file names are now shown correctly in some cases where they previously were not.


Version 3.0.0 (PRO only), March 27th, 2024:

  • Initial Early Access Release.

MORPH 2 Update Download

To download the latest version of MORPH 2, please fill in the form below. You will then receive a download URL per email shortly.

  • Download the latest MORPH 2 for Mac.
  • Download the latest MORPH 2 for Windows.

Version 2 Change Log

Version 2.6.0, March 27th, 2024:

  • MORPH 2 now unlocks when it sees a MORPH 3 or MORPH 3 PRO license. Having this version installed facilitates full session recall after upgrading to MORPH 3 or MORPH 3 PRO. 


Version 2.5.0, December 15th, 2022:

  • MORPH 2 now supports Apple Silicon natively on the Mac for AUVST 2VST 3 and AAX Native.
  • This update resolves VST 3 compatibility issues with various hosts, most notably Ableton Live 11.x, on Mac and Windows.
  • The macOS installer now allows choosing which plugin formats to install, and sports improved Dark Mode support.
  • The About screen now displays the CPU architecture (x64/Apple Silicon).
  • The latest version of the plugin ships as 64-bit only from now on. Previous versions with 32-bit support are of course still available. 


Version 2.4.0 (Update for Mac only), November 2nd, 2021:

  • MORPH is now compatible with macOS 12.x Monterey.
  • This version requires macOS 10.15.x or newer, and is 64-bit only. For 32-bit and compatibility to older macOS up to and including 10.14.x Mojave, please use the functionally identical previous version 2.3.2.

Basic License Operations Guide

For a step-by-step guide on how to activate or de-activate your plugin, start a free trial, move an activation from one computer to a different one, as well as general copy protection info, please refer to this guide.

Current Version Numbers:

AU, VST, VST3, AAX Native

AU, VST, VST3, AAX Native

(Legacy) MORPH 2
AU, VST, VST3, AAX Native